A random thoughts &
mental burblings
that constitute my diary.
"Poppy Ann"
www.flickr.com
This is a Flickr badge showing public photos from powerlines2k. Make your own badge here.
Blogs of Legend
Soil Sample's
Kelvin
5913ss
Rob 3528ss
Kel
2420ss
Markiss
2274ss
Tshari
1610ss
Edmund
1166ss
Victor
550ss
Lemur girl
500ss
Leeann
180ss
Sophie
105ss
Mona
100ss
Brian
50ss
Charles
10ss
Frank
5ss
WOS creatures
Archives
November 2003 December 2003 January 2004 February 2004 March 2004 April 2004 May 2004 June 2004 July 2004 August 2004 September 2004 October 2004 November 2004 December 2004 January 2005 February 2005 March 2005 April 2005 May 2005 June 2005 July 2005 August 2005 September 2005 October 2005 November 2005 December 2005 January 2006 February 2006 March 2006 April 2006 May 2006 June 2006 July 2006 August 2006 September 2006 October 2006 November 2006 December 2006 January 2007 February 2007 March 2007 April 2007 May 2007 June 2007 July 2007 August 2007 September 2007 October 2007 November 2007 December 2007 January 2008 February 2008 March 2008 April 2008
November 2003 December 2003 January 2004 February 2004 March 2004 April 2004 May 2004 June 2004 July 2004 August 2004 September 2004 October 2004 November 2004 December 2004 January 2005 February 2005 March 2005 April 2005 May 2005 June 2005 July 2005 August 2005 September 2005 October 2005 November 2005 December 2005 January 2006 February 2006 March 2006 April 2006 May 2006 June 2006 July 2006 August 2006 September 2006 October 2006 November 2006 December 2006 January 2007 February 2007 March 2007 April 2007 May 2007 June 2007 July 2007 August 2007 September 2007 October 2007 November 2007 December 2007 January 2008 February 2008 March 2008 April 2008
Mindless gibberish of a tired mind
Wednesday, November 24, 2004
Tech corner part 2
Here is part number 2.
5) Take the short piece of wire you cut earlier and cut through the outer casing so you end up with the individual cores. Strip each end as before.
Fig 4
You should end up with fig 4.
6) Take the brown/red (Live) wire and cut it in half, Strip both the cut ends as before and put one half to one side.
7) Use these wires to wire up the second bulb holder as per step 4 (obviously the brown/red (live) will be shorter).
This gives you your second part of your Diagram.
8)Take you starter holder as below.
And wire into the left wire point the brown/red (Live) wire from the bulb holder you just wired and into the right wire point wire the short piece of brown/red (live) wire you cut off in step 6.
It should end up looking like this.
This will now give you the third part of your circuit diagram below.
Part 3 to follow.
